MM510 Screw Attach Installation Instructions

Posted By: Ric Published: 30/09/2019 Times Read: 1793 Comments: 0

Installation Instructions

Step 1: Drill a hole for shaft of 510.

Step 2: Recess if needed a hole for the top plate 2.5mm deep to allow for the solder tab.

Step 3: Drill a 5mm hole to take your negative
wire soldered to the bent negative tab.

Step 4: Place 510 in position and drill 2 holes for the knurled insert nut.

Step 5: Widen holes and epoxy the knurled nuts into the holes.

Step 6: Finish your mods wiring and screw the 510 on with M2.5 countersunk machine screws.

Tags: MM510 Screw Attach Installation Instructions

Products related to this post