The Switchfet v2 is an all in one solution to providing mosfet switched capability for bottom feeding personal vaporizers that use lithium-ion cells, without compromising space owing to its small footprint, allowing you to build clutter free internals.
Power consumption is practically zero when not switched.
The board incorporates a voltage supervisory circuit which monitors the input voltage
Which enables undervoltage lockout when the input voltage falls below 2.7 volts.
The assembly is very simple using three wires of adequate thickness for single cell operation
Negative input & Negative 510 output has been designed for 18 AWG, the positive input will accept 24 AWG though smaller gauge is acceptable.
Operation is very simple by pressing the onboard switch.
The board has Reverse polarity protection onboard and will autofire when cell is installed in reverse.
Although there is a 100A mosfet fitted, due to board limitations of size there is an amperage limit of 50 Amps.
Footprint:- 13mm x 13mm x 5.3mm
Mosfet:- 30v 100A LFPAK, RDSon 1.35m Ω (typ), VGS(th) 1.46v (typ)
Operational voltage:- 2.7v - 4.20v
Battery cut-off :- 2.7v
Idle current :- typical 1.3μA max 3.3μA
Reverse polarity protection :- Yes
Board amperage Limit :- 50A
- Product Code: 542
- Availability: In Stock
- Ex Tax: £5.83