ModMeter V2 it the all in one display that will show you the wattage,
amperage, resitance, voltage under load and battery voltage of your mod. This Ohm\'s law calcualtor chipset doesn't carry any current so it will work
perfectly with high current builds so no more limits on your super sub ohm high current setups.
ModMeter works perfectly with P- Fet builds, OKL, OKR & Raptor builds. It does work with PWM but the numbers are funky because of the nature of PWM with the Voltage Out jumping around. Battery levels and resistance are true though and are unaffected by the PWM signal.
Please note that ModMeter
does NOT work with N-Channel mosfet builds as the meter acts like a bridge and will make the mod fire when connected.
|ModMeter Voltage Range||1 to 4s. 3.2v - 16.8v.|
|Battery Voltage||Displays Voltage In (Vi)|
|Resistance||Displays resistance to 2 decimal
places. Example: 1.23ohm|
F+ connects to 510+ & F- connects to 510-
Range: 0.00ohm - 9.90ohm. If over this range it will display 9.90ohm
|Voltage Out||Displays the voltage when firing your mod to 1 decimal place.|
|Wattage||Wattage is calculated from resistance and voltage out.|
|Amperage||Displays amperage to 2 decimal places. Example 1.23A.|
Amperage is calculated from the resistance and voltage under load.
|Reverse Polarity Protection||Auto protection if the batteries are put in the wrong way around.|
|Wires||150mm long & silicone
F+ connects to 510+
F- connects to 510-
B+ connects to battery+
B- connects to battery-
|PCB Size||Approx 20mm x 28mm x 8mm|
|Display Timeout||ModMeter has an always on connection so the display can stay on for 10 seconds after firing.|
More info can be found on www.modmeter.com
- Brand: ModMaker
- Product Code: 457
- Availability: In Stock
- Ex Tax: £12.49